Gas stream
Actual gas flow, operating temperature, moisture and process variations inform the filter design basis.
Evapotech supports industrial environmental management through consultancy, testing, operations and maintenance, and products for air pollution control, water treatment, wastewater treatment, and environmental monitoring.






EVAPO TECHEvapo Tech designs and manufactures pulse jet bag filters and baghouse systems for particulate control. System selection begins with the gas stream, dust characteristics and operating conditions at your site.

Dust-laden gas passes through fabric filter bags, which retain particulate matter. Short compressed-air pulses release accumulated dust from the bags into a collection hopper. The filter media and cleaning arrangement must suit the application.
Applications within the NPC empanelment include flue-gas emission control for boilers, furnaces and thermic fluid heaters. Suitability and performance requirements are assessed for each installation.
Actual gas flow, operating temperature, moisture and process variations inform the filter design basis.
Dust loading, particle characteristics and material behaviour influence filtration, cleaning and dust handling.
Discuss bag media, filtration area, casing material, hopper discharge, duct connections, fan duty and access for maintenance.
Certificate NPC/ECAG/APCDES/EC/2026-27/011
Issued 27 May 2026 · Valid up to 27 May 2028, subject to the certificate conditions.
The certificate identifies the named APCD technology for boiler, furnace and thermic-fluid-heater flue-gas emission control under the NPC-APCDES scheme. It is limited to the empaneled equipment and is not blanket approval of other models or configurations.
Read both pages for eligibility, OEM responsibilities, surveillance and the conditions affecting validity.
Filter condition, differential pressure, pulse-cleaning air supply and dust discharge are relevant operating checks. Inspection and maintenance requirements should be defined for the installed system.
Explore operations & maintenance supportGas flow is only one input. Temperature, moisture, dust loading and characteristics, required outlet conditions and available utilities also affect selection. Share your process data before a design is finalised.
Share your site location, process and fuel or material handled, actual gas flow, temperature, pollutant data, available space and utilities, and the required emission objective. Include recent stack-test reports and existing-system drawings where available.
No. The certificate has a defined scope and conditions. The equipment specification, installation, commissioning, operation and performance verification must address the particular site and applicable requirements.
Email your process details, gas flow, operating conditions and emission objective. Our team will discuss the design basis, equipment scope and support requirements.
Dust Extraction System, Bag House Filter, ID fan and FD fan, Wet Water & Chemical Scrubber, Dry Chemical Scrubbers, Multi Cyclone Separator, Trema Cyclone, Multi Cyclone Systems
Sewage Treatment Plant, Effluent Treatment Plant, Skid Mounted ETP cum STP for Hospitals, Pan Evaporators, Electrocoagulation and Electro ionisation
Ambient Air Quality Monitor, Continuous Emission Monitoring Systems (CEMS), Effluent Quality Monitoring Systems, VOC Monitors, Sulphur dioxide Monitor and alarm systems (SO2 Monitors), Piezometers, Bag Fault Detection System, Telemetry based Ultrasonic flow meters





















